Site icon OFH

How to read an optics production drawing


The most commonly used standard for optics manufacturing is ISO 10110, first created in 1927. Below we describe some of the key parameters called out in the optics production drawing standard.

The image below is of a typical lens drawing.

The Drawing Area and Table of Parameters are shown above

The drawing can be divided into two areas – Drawing Area and Table of Parameters.

Optics production drawing area

Let’s review the drawing area of the biconvex lens seen above.


Need help? Click here to learn more about our custom optical engineering services.


The specifics are indicated with numbered parameters and conventional signs

You can see a set of numbered parameters and conventional signs described below.

  1. Lens diameter – full lens diameter.

  2. Lens thickness – thickness of a lens along the axis of the base surface.

  3. Lens edge thickness. This parameter is given for reference. Its value depends on the set of defined (with tolerances) parameters.

  4. Surface texture – composite conventional sign with set of parameters which defines quality of surface processing.

  5. Datum surface – surface which define datum axis of the lens. It is possible to see more than one datum surface on different drawings.

Table of parameters area

Table of lens parameters is divided into columns.

Table of parameters has requirements for the surface column and requirements for the optical element material column

We can see two columns with requirements for the surface and one column with requirements for the optical element material in the drawing example.

Column with surface parameters

Column with surface parameters specifics

  1. Radius of curvature value. Convex (CX) or concave (CC).

  2. Effective (clear) diameter – diameter is meant for light propagation. Remember that optical coating is overlaid only in border of effective diameter.

  3. Protective bevel.

  4. Optical coating of the surface – should be meant working wavelength or set of wavelength or spectral range and coefficient of transmitting efficiency in percentage.

  5. Tolerances on surface form (figure error). First number is the power difference in fringes. Second number (in brackets) is irregularity in fringes. Also wavelength for measurements should be defined.

  6. Centering – tilt angle of a surface defined as angle between the datum axis and the surface normal. Units – angle minutes and angle seconds.

  7. Scratch and dig specifications – there is defined all possible surface imperfections.

  8. Damage threshold of laser irradiation. Generally speaking, this parameter is critical for optical elements which work with high power laser irradiation. This is why this cell is often empty for the remaining optical elements.

Column with material requirements

Column with material requirements is placed between columns with surface parameters.

Column with material requirements is placed between columns with surface parameters.

It includes the following items.

  1. Optical material Name.

  2. Refractive Index.

  3. Abbe Number.

  4. Stress Birefringence – defines maximum allowable stress in nm/cm of optical path length.

  5. Bubbles and Inclusions – defines number and size of bubbles and inclusions in the optical element.

  6. Inhomogeneity and Striae – defines homogeneity class number and striae class number.

All requirements and properties of optical elements are defined by optical and mechanical engineers in the course of preparing an optical design.

Even with a published standard, there can be confusion and different interpretations. A best practice is to check with your lens manufacturer about their definitions and questions. For more information, one of the best and most complete online documents to understand this subject is available here.

Exit mobile version